# Electric Traction MCQ With Explanation | Objective Type Question of Electric Traction | Important MCQ of Electric Traction for SSC JE (electrical) with explanation

Ques.1.  Steam Engine provided on steam locomotives is

1. Single acting condensing type
2. Double acting condensing type
3. Double acting non-condensing type
4. Single acting non-condensing type

Explanation:-

The steam engine is an external combustion engine in which steam is used as the working substance to convert heat energy of steam into mechanical work. A steam engine is a reciprocating type of engine. In a steam engine, steam at high pressure and temperature is expanded to move the piston. The reciprocating motion of the piston is converted into rotary motion by a slider crank mechanism.

Classification of Steam Engine

Steam engines may be classified according to different criteria, as follows:

1. The orientation of the axis of cylinder:
1. Vertical
2. Horizontal
3. Inclined.
2. The direction of steam inlet:
1. Single acting: In single-acting endues the steam is supplied on one side of piston only. Thus, we get one power stroke and one idle stroke in each cycle.
2.  Double acting:-  In double acting engines steam is supplied on one side of the piston during forward smoke and on its other side during the return stroke. Thus, we get two power strokes in each cycle.
3. Number of cylinders:
1. Simple steam engine:- In simple steam engine the steam expands in one cylinder only
2. Compound steam engine:- In the compound cylinder, steam is allowed to expand partly in one cylinder, and partly in second or third cylinders.
4.  The exhaust of steam:
1. Condensing:- In condensing engines, the steam coming out of the cylinder, after expansion, is sent to an enclosed chamber called condenser. Inside the condenser pressure is maintained below atmospheric pressure. Here, the steam is condensed by cooling water.
2. Non-condensing:- In noncondensing engines, the steam is exhausted directly to the atmosphere. Condensing engines are more efficient, as more work output is obtained from the steam. e.g steam locomotive and steam wagon.
5. Application:
1. Stationary:-Stationary engines are used in plants for generation of mechanical or electrical power, and to drive pumps, shafts, machines, etc.
2. Locomotive:- Locomotive engines are used in railroad applications.
3. Marine:- Marine engines are used in ships.
6. Speed:
1. Low speed below 100 rpm
2. Medium speed—100 to 300 rpm
3. High speed above 300 rpm

Since it is difficult to install a condenser on a locomotive, the steam engine runs non-condensing and, therefore, has a very low thermal efficiency of about 6-8 percent. it has strictly limited overload capacity.

Ques.2. The overall efficiency of the steam locomotive system is close to

1. 5 to 10%
2. 25 to 30%
3. 55 to 60%
4. 75 to 80%.

Explanation:-

In a steam locomotive, work output can be measured as “indicated” or “cylinder” horsepower, or as “drawbar” horsepower. “Indicated horsepower” refers to an indicator diagram, plotting piston displacement against pressure, a device invented by James Watt early in the history of the steam engine. “Drawbar horsepower” is the power that the locomotive applies to its trailing load, in other words, indicated horsepower minus the internal friction and rolling resistance of the locomotive.

The thermal efficiency of the locomotive is the work output, specified as drawbar horsepower or indicated horsepower.

Of the power developed in the cylinders, only 75% reached the drawbar, the rest being consumed in friction of moving parts and rolling resistance. It is easy to see how the total thermal efficiency of a steam locomotive was 4% to 8% at best. Typical coal consumption was 4.5 pounds per drawbar horsepower-hour, burning bituminous coal with a calorific value of ( 13,700,000 joules) per pound. A horsepower-hour is 2,685,600 joules. Therefore the thermal efficiency of a typical steam locomotive was no more than 4% to5%, calculated as (2,685,600/(4.5 x 13,700,000)

Ques.3. High-pressure locomotive work at the steam pressure of

1. 10-15 kg/cm2
2. 20 – 30 kg/cm2
3. 40 – 50 kg/cm2
4. 80 – 90 kg/cm2

Explanation:-

A high-pressure steam locomotive is a steam locomotive with a boiler that operates at pressures well above what would be considered normal. In the later years of steam, boiler pressures were typically 200 to 250 psi (14kg/cm2 to 17 kg/cm2). High-pressure locomotives can be considered to start at 350 psi (24.11 kg/cm2).

Ques.4. In a steam locomotive, electric power is provided through

1. Battery system
2. Diesel engine generator
4. Small turbo-generator

Explanation:-

A turbogenerator is the combination of a turbine directly connected to an electric generator for the generation of electric power. Large steam-powered turbo generators provide the majority of the world’s electricity and are also used by steam-powered turbo-electric ships.

A steam-powered turbogenerator (sometimes called a “dynamo”) supplied electricity for the headlight and for the classification lights, illuminated number boxes, cab and gauge lights, and tender lights in a steam locomotive. The generator is usually on top of the boiler or on its shoulder.

Ques.5. Maximum horsepower of a steam locomotive is

1. 100
2. 500
3. 1500
4. 150

Explanation:-

Horsepower (hp) is a calculation of the rate at which work is performed; it measures an engine’s power output as a function of both torque and engine speed. James Watt (1736-1819), an engineer who helped make significant improvements to the steam engine, developed the formula to determine an engine’s hp. Watt wanted to compare the power of a steam engine to the number of horses required to perform the same amount of work. He based his calculation on observations of horses.

The horsepower range of other steam locomotives varies between 1,000 horsepower, to 2,000 horsepower.The Union Pacific “Big Boy” steam locomotive was rated at 6,290 HP.

Ques.6. The advantage of electric traction over other methods is

1. No pollution problems
2. Faster acceleration
3. Better braking action
4. All of the above

Explanation:-

Electric Traction

The system which uses electrical power for traction system i.e. for railways, trams, trolleys, etc. is called electrical traction.

OR

Electric traction means a locomotion In which the driving force is obtained from electric motors.

• Cheapness:- It is the cheapest method of all other methods of traction.
• Cleanliness:- It is free from smoke and flue gasses
• Maintenance cost:- Maintenance and repair cost is about 50% of steam traction system.
• Starting time:- It can be started without loss of time.
• High starting torque:- This system uses of d c. & a.c series motors, which has a very high starting torque.
• Braking:- In electric traction, regenerative braking is used which feeds back 40% of the energy.
• Saving in high-grade coal:- No coal is required for electric traction.

Ques.7. The range of horsepower for diesel locomotives is

1. 100 to 500
2. 500 to 1000
3. 1500 to 2500
4. 4000 to 5500

Explanation:-

### Diesel traction

Diesel traction is an autonomous system and depends on just two components: the engine and its transmission.

The characteristics of the diesel engine offer some advantages to the railway, but these are tempered by several constraints. A diesel engine offers good thermal efficiency, but the low power-to-weight ratio.

Diesel locomotives were introduced for the first time in our county in 1945 for shunting purposes on D.C generator and in 1956 for mainline services on M.G. sections. Indian Railways started using diesel locomotive extensively for mam line service since 1958.

Diesel-electric traction system employs a self-contained motive power unit using diesel engine which drives I.C. generator. This supplies current to the traction motors which are geared to driving axles. The efficiency of the diesel-electric locomotive (26 to 30%) is more than that of the steam locomotive (6 to 8%) and less than that of an electric locomotive (34 to 38%).

Following four types of the diesel-electric locomotives are employed in practice:

(i) The main-line diesel-electric locomotive having engines of output not exceeding 1600 kW and speeds 160 km/h.

(ii) The shunting diesel-electric locomotive having an engine of 225 to 375 kW output and speed between 25 to 50 km/h.

(iii) The diesel-electric multiple unit stock of which each motor has an engine of 135 to 150 kW output and the train is capable of having speeds between 80 to 110 km/h.

(iv) The diesel-electric rail car having an engine of 75-450 kW output which may operate as a single car or with one or more trailer coaches.

Since its introduction to America, the diesel-electric locomotive has ranged in size from 60-ton, 300 H.P. to 267½ ton, 3,000 H.P.  However, the typical diesel falls into a medium-horsepower bracket for reasons of operating flexibility. I,350, I,500, I,600, I,750 or I,800 H.P.

Although steam locomotives usually exceeded diesel in brute horsepower, diesel engines had more tractive effort, especially at low initial speeds. When a diesel locomotive starts to move a train, the diesel-powered electric motors that turn the wheels operate at a low rpm setting, producing high torque, and thus high tractive effort. As a diesel locomotive accelerates, tractive effort decreases, but the momentum of the train compensates for this reduction. Furthermore, the horsepower of a steam locomotive increased as its speed increased, while that of a diesel locomotive remained constant at all speeds. These characteristics made the diesel especially suitable for switching service. At ten mph, a 600-hp diesel switcher actually had more tractive effort than a 2,000-hp steam locomotive. A 6,000hp steam locomotive could generate 135,000 pounds of tractive effort, while a diesel of identical horsepower had an output of 230,000 pounds in low-speed switching operations.

The diesel-electric’s drawbar thermal efficiency of 26% to 28%, compared to 6% to 8% for a steam locomotive, meant that less fuel had to be carried and refueling stops were less frequent. Diesel fuel was more expensive per pound than coal but the higher thermal efficiency resulted in fuel costs per unit of power only 50% to 65% of those of a steam locomotive. Additionally, the diesel needed practically no water. Refueling was quicker than for a steam locomotive, with no ash handling.

Ques.8. The efficiency of diesel locomotives is nearly

1. 26 – 30 percent
2. 35 – 40 percent
3. 50 – 55 percent
4. 70 – 75 percent

Explanation:-

Thermal efficiency is the ratio of how effectively an engine converts a fuel’s heat energy into usable work. Each fuel has a certain amount of heat or thermal energy. The energy of the fuel has the potential to produce a certain amount of work when burned in the engine. This thermal efficiency is a theoretical value.

Diesel fuel has more heat energy than coal and gasoline. Diesel engines also have higher compression ratios. Both of these are the reason why diesel gets better fuel economy than gasoline engines and steam engine. The efficiency of the diesel-electric locomotive (26 to 30%) is more than that of the steam locomotive (6 to 8%) and less than that of an electric locomotive (34 to 38%).

Ques.9.  Overload capacity of diesel engines is usually restricted to

1. 1 %
2. 10%
3. 25%
4. 50%

Explanation:-

Diesel engine loads:-  To control an engine i.e to keep it running at the desired speed, either in accordance with or regardless of the changes in the load carried by the engine. The control of an engine depends upon two factors

(i) Its own performance characteristics

(ii) The type of load which it drives.

The total load of an engine consists of two parts:

(1) The internal load, or friction horsepower due to the friction, windage, and pumping losses within the engine itself and required by the attached engine-driven auxiliaries

(2) The external load, connected to the main drive shaft which takes the useful or brake horsepower output of the engine.

The indicated horsepower is equal to the total load, or the sum of the friction and the brake horsepower. The indicated horsepower necessary to balance this total load at any speed depends upon the pressures developed during combustion of the fuel and the resulting mean indicated pressure. The combustion process and the mean pressure developed by it depend primarily upon the quantity of fuel injected on the firing stroke if all other conditions remain substantially the same.

Most diesel fuel-injection systems are designed so that the amount of fuel delivered at a fixed setting or position of the fuel control is approximately the same per injection, regardless of the engine speed. The total load at any speed, therefore, can be balanced by regulating the fuel control to the setting required to give the necessary mean indicated pressure. In other words, the setting of the fuel control regulates the speed of diesel engine under any load.

The frictional forces or the internal load of an engine increase rapidly with an increase in the engine speed. This also is usually true of the external load, so that, in general, greater mean indicated pressures are required to balance the total load at higher speeds.

The diesel cycle is known as a “constant pressure cycle” which depends on high compression to ignite the fuel, no spark ignition involved. As the compression in the cylinder increases, the gases in the cylinder heat up and diesel fuel is injected starting the combustion. Since the fuel is sprayed in droplets, not all of it is burned at once. As the fuel atomizes between the drops it combusts until all the droplets are reduced in size and used up. This burning of fuel is hopefully complete by the time the piston is at the bottom of the stroke. This slower burning of diesel fuel gives a constant force on the piston, hence – “constant torque” as opposed to the explosive spark ignition of a gasoline(Otto cycle) engine. Therefore the horsepower of the diesel engine locomotive remained constant at all speeds.

Due to constant kW output prime mover, the overload capacity of diesel locomotive is low. Even an overload of 15% may stall the engine.

Ques.10. Suburban railways use

1. 1500 V DC
2. 750 V DC
3. 1000three-phase AC
4. 3.3 kV three-phase AC

Explanation:-

The system used for traction is a combination of both AC and DC, you must be knowing that the overhead power cable above the train is fed with AC supply (in India its 25kV) which is received by the transformer inside the railway engine which is stepped down, i.e the voltage level is reduced (this also causes the current level to increase and this increased current level is the driving force of the traction motor) and this power is fed to a device which converts AC power to DC power which is known as Rectifier. Now this DC supply is given to a given number of sets of DC Series & Shunt motors.

Direct current at 600-750 V is universally employed for tramways in urban areas and for many suburban railways while 1500-3000 V dc is used for mainline railways. The current collection is from the third rail (or conductor rail) up to 750 V, where large currents are involved and from overhead wire for 1500 V and 3000 V, where small currents are involved.

It may be noted that for heavy suburban service, low voltage dc system is undoubtedly superior to 1-phase ac system due to the following reasons:

1. DC motors are better suited for frequent and rapid acceleration of heavy trains than ac motors.
2. DC train equipment is lighter, less costly and more efficient than similar ac equipment.
3. When operating under similar service conditions, dc train consumes less energy than a 1-phase ac train.
4. The conductor rail for dc distribution system is less costly, both initially and in maintenance than the high-voltage overhead ac distribution system.
5. DC system causes no electrical interference with overhead communication lines.

The only disadvantage of the dc system is the necessity of locating ac/dc conversion sub-stations at relatively short distances apart.

Close